Drywall Replacement in Gainesville, FL
Drywall replacement means tearing out old board, hauling it away, and hanging and finishing new board in its place. In Gainesville the combined price runs about $2.20 to $4.25 per square foot. Replacement makes sense when damage covers a large part of a wall, when the board is crumbling, or when a remodel opens walls anyway.
Free estimate. Send a few photos with the form, or call and we will talk it through.
📞 Talk to a Drywall Expert: (352) 649-3354Request a FREE Quote
Drywall Replacement, explained in plain English
Tear-out is the messy part, so we contain it. We lay floor protection, cut the board along stud lines, and bag the debris. Pulling old board shows what is behind it: old wiring, water stains, mold, or framing that needs attention. Anything we find gets shown to you and priced before we hang new board.
Once the framing is ready, new board goes up, gets taped and finished, and the room is ready for paint. A twelve-by-twelve room that is gutted and re-drywalled takes about four days with drying time.
What to think about before you start
- Tear-out adds $0.60 to $1.20 per square foot to the cost of new installation.
- Ask whether the old board was ever wet. A moisture meter reading tells the story.
- Plaster-and-lath walls in older homes are a different job. We look at them in person before quoting.
- If you are repainting anyway, replacing a damaged wall is often cleaner than stacking repairs.
What it costs around Gainesville
The rate card puts tear-out and replacement at $2.20 to $4.25 per square foot combined, for a paint-ready Level 4 finish. A 12 by 12 bedroom gutted and re-drywalled runs about $1,160 to $2,245. Hidden surprises are priced once they are visible, never guessed in advance.
Planning ranges from our local rate card, not a quote. See the cost guide and calculator.
How it goes in Gainesville
North Central Florida homes get damp. Older houses around Micanopy, Melrose and the Gainesville historic districts sometimes have wallboard that has absorbed years of humidity and gone soft. When we pull it, we check framing and insulation behind it too.
How the job goes, step by step
- Cover floors and seal doorways.
- Cut out and bag the old board.
- Check framing, wiring and insulation with you.
- Hang, tape and finish new board.
- Clean up and hand the room back paint-ready.
Quick answers about drywall replacement
When should I replace drywall instead of repairing it?
Replace when damage covers a big share of a wall, when the board is soft or crumbling, or when you are opening walls for a remodel anyway.
How much does drywall replacement cost?
About $2.20 to $4.25 per square foot with tear-out, hauling and a Level 4 finish. Small jobs carry a minimum charge.
How long does replacement take?
Most rooms take three to four days including drying time between coats.
Who hauls away the old drywall?
We do. Debris removal is part of the replacement price.
What if you find mold or water damage behind the wall?
We stop and show you. Wet or moldy board is removed, the cavity is dried, and the cause gets fixed before new board goes in.
Can you replace just part of a wall?
Yes. We cut along studs and replace a section, then blend the seams. See drywall repair for smaller jobs.
More questions? See the full FAQ.
Related drywall services
Ready for a straight answer on your drywall?
Call or send photos. We will tell you what we see and what it should cost, and we confirm the price in person before any work starts.
📞 Call (352) 649-3354 Request a free estimateGet a free drywall replacement estimate
Tell us about the job. Photos help us price it before we visit.